CONNECTING RODS (COMPLETE SET) Willys
€336.00
Tax included
Kit of 4 connecting rods assembled and delivered with screws.
2x WO640072 Connecting rod assembly for cylinder 2 and 4.
2x WO640071 Connecting rod assembly for cylinder 1 and 3.
IMPORTANT: THE CONNECTING ROD FOOT LUBRICATION HOLES MAY BE CLOGGED WITH PROTECTIVE WAX.
THE CONNECTING ROD MUST BE CLEANED BEFORE ASSEMBLY!
The engine connecting rod is an essential component of the Go-Devil L-134 engine. It connects the piston to the crankshaft and transmits the forces generated to convert the piston’s linear motion into the engine’s rotational motion.
This set of 4 connecting rods is designed for Jeeps equipped with the Willys Go-Devil L-134 engine, including the Willys MB, Ford GPW, Hotchkiss M201, M38, M38A1, CJ-2A, CJ-3A, and CJ-3B.
Description
Connecting rods are greased for storage (black in appearance); clean before installation
7/16" nut locks sold separately; find them right here.
Why replace an engine connecting rod?
During an engine rebuild, a connecting rod that is deformed, shows wear on the bearing surfaces, or has damage caused by over-tightening may need to be replaced.
Installing a new connecting rod ensures a properly functioning mechanical assembly during engine restoration or overhaul.
Caractéristiques
WO640071/72
Compatibility
An error occurred
Your vehicle is not listed? Contact our customer support
Military Jeep
Model
M201 24 volts
Year
1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966
Model
M38 24 Volts
Year
1950, 1951, 1952
Model
M38A1 24 Volts
Year
1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971
Model
MB-GPW 12 Volts
Year
1941, 1942, 1943, 1944, 1945
Model
MB-GPW 6 Volts
Year
1941, 1942, 1943, 1944, 1945
Série CJ Jeep
Model
CJ-2A
Year
1945, 1946, 1947, 1948, 1949
Model
CJ-3A
Year
1948, 1949, 1950, 1951, 1952, 1953
Model
CJ-3B
Year
1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968
Customers who bought this product also bought:
Kit of 4 connecting rods assembled and delivered with screws.
2x WO640072 Connecting rod assembly for cylinder 2 and 4.
2x WO640071 Connecting rod assembly for cylinder 1 and 3.
IMPORTANT: THE CONNECTING ROD FOOT LUBRICATION HOLES MAY BE CLOGGED WITH PROTECTIVE WAX.
THE CONNECTING ROD MUST BE CLEANED BEFORE ASSEMBLY!
The engine connecting rod is an essential component of the Go-Devil L-134 engine. It connects the piston to the crankshaft and transmits the forces generated to convert the piston’s linear motion into the engine’s rotational motion.
This set of 4 connecting rods is designed for Jeeps equipped with the Willys Go-Devil L-134 engine, including the Willys MB, Ford GPW, Hotchkiss M201, M38, M38A1, CJ-2A, CJ-3A, and CJ-3B.