For all inquiries about parts or transport, contact us 📞✉️
FRONT SHOCK ABSORBER
€42.00
Tax included
Our shock absorbers are remanufactured, including nitrogen pressurization, which promotes better handling and longer life than the original ones.
The shock absorbers are recognizable by their length: short at the front and long at the rear.
The rear shock absorbers also have the unique feature of having a skid plate positioned toward the front.
We recommend replacing both shock absorbers on the same axle at the same time for better braking and to avoid imbalance.
A set of steel bushings is included in the box; these are not for use on MB, GPW, and M201 models.
Compatible with Ford GPW, Hotchkiss M201, Jeep Willys MB, M38, CJ-2A, CJ-3A, and CJ-3B.
Description
Exclusive remanufactured: Jeep Village
Jeep Village Workshop Tip:
In case of severe wear, the vehicle may bounce excessively, sway suddenly when cornering, and/or give you the impression of losing control of your vehicle.
It is therefore imperative to check for signs of wear to anticipate any danger!
The shock absorber contains oil for proper operation: if you see any oil leaking from the exterior, these should be replaced in pairs.
Caractéristiques
WOA6902
You might also like
Compatibility
An error occurred
Your vehicle is not listed? Contact our customer support
Military Jeep
Model
M201 24 volts
Year
1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966
Model
MB-GPW 12 Volts
Year
1941, 1942, 1943, 1944, 1945
Model
MB-GPW 6 Volts
Year
1941, 1942, 1943, 1944, 1945
Série CJ Jeep
Model
CJ-3A
Year
1948, 1949, 1950, 1951, 1952, 1953
Model
CJ-3B
Year
1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968
Customers who bought this product also bought:
Our shock absorbers are remanufactured, including nitrogen pressurization, which promotes better handling and longer life than the original ones.
The shock absorbers are recognizable by their length: short at the front and long at the rear.
The rear shock absorbers also have the unique feature of having a skid plate positioned toward the front.
We recommend replacing both shock absorbers on the same axle at the same time for better braking and to avoid imbalance.
A set of steel bushings is included in the box; these are not for use on MB, GPW, and M201 models.
Compatible with Ford GPW, Hotchkiss M201, Jeep Willys MB, M38, CJ-2A, CJ-3A, and CJ-3B.